Difficulty

Easy

Steps

4

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Cover
  • 1 step
  • Hard Drive
  • 1 step

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDell Inspiron 17-5749

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn off power to the laptop.
  • Unplug the charging cable from the laptop.
  • Failure to unplug the charging cable could result in damaging the computer or seriously injuring yourself.
  • Wear the anti-static wrist strap or work in an uncarpeted area to prevent static shocks. Shocks may damage the components.

Turn off power to the laptop.

Unplug the charging cable from the laptop.

Failure to unplug the charging cable could result in damaging the computer or seriously injuring yourself.

Wear the anti-static wrist strap or work in an uncarpeted area to prevent static shocks. Shocks may damage the components.

1024

Step 2

  • First carefully turn the laptop over so you can access the battery.
  • Switch each of the battery latches to the “unlocked” position.
  • Pull battery upwards by the tab to remove from the laptop.

First carefully turn the laptop over so you can access the battery.

Switch each of the battery latches to the “unlocked” position.

Pull battery upwards by the tab to remove from the laptop.

Step 3

              Back Cover
  • Remove the two 5.5mm screws that secure the base cover to the computer’s base.
  • Using the plastic opening tool, carefully pry open the base cover starting from the center.
  • Lift the base cover upwards to remove and set it aside.

Remove the two 5.5mm screws that secure the base cover to the computer’s base.

Using the plastic opening tool, carefully pry open the base cover starting from the center.

Lift the base cover upwards to remove and set it aside.

Step 4

              Hard Drive
  • Remove the 2.5mm screw that secures the hard-drive assembly to the computer base.
  • Using the pull tab, slide the hard-drive assembly to disconnect it from the system board.
  • Lift the hard-drive assembly off the computer base

Remove the 2.5mm screw that secures the hard-drive assembly to the computer base.

Using the pull tab, slide the hard-drive assembly to disconnect it from the system board.

Lift the hard-drive assembly off the computer base

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Christopher Tran

Member since: 02/13/2018

1,146 Reputation

                                      12 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Washington State, Team S1-G2, Lobnitz Spring 2018                        

                                                  Member of Washington State, Team S1-G2, Lobnitz Spring 2018 



                    WSU-LOBNITZ-S18S1G2                     


                                            6 Members                     


                                            12 Guides authored