Difficulty

Easy

Steps

2

Time Required

                          4 - 5 minutes            

Sections

1

  • RAM
  • 2 steps

Flags

0

  • BackDell Inspiron 17-3721

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RAM               
  • Remove the two 6.5 mm PH1 Philips head screws from the laptop.
  • Lift up the small panel from the top, using the spudger if necessary.

Remove the two 6.5 mm PH1 Philips head screws from the laptop.

Lift up the small panel from the top, using the spudger if necessary.

1024

Step 2

  • Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed.

Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Christopher Meninno                     

Member since: 03/20/2018

293 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team S5-G3, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G3, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G3                     


                                            3 Members                     


                                            7 Guides authored