Difficulty
Easy
Steps
2
Time Required
4 - 5 minutes
Sections
1
- Hard Drive
- 2 steps
Flags
0
BackDell Inspiron 17-3721
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Remove the two 6.5 mm PH1 Philips head screws on the back panel.
- Lift up the small panel from the top, using the plastic opening tools if necessary.
Remove the two 6.5 mm PH1 Philips head screws on the back panel.
Lift up the small panel from the top, using the plastic opening tools if necessary.
1024
Step 2
- Remove the two 5.5 mm PH1 Phillips head screws holding in the hard drive.
- Slide the hard drive out of its slot and lift it out of the device.
- At the time of the creation of this guide, our device did not include a hard drive.
Remove the two 5.5 mm PH1 Phillips head screws holding in the hard drive.
Slide the hard drive out of its slot and lift it out of the device.
At the time of the creation of this guide, our device did not include a hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kevin Prairie
Member since: 03/20/2018
433 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team S5-G3, Peak Spring 2018
Member of UMass Dartmouth, Team S5-G3, Peak Spring 2018
UMASSD-PEAK-S18S5G3
3 Members
7 Guides authored
