Difficulty
Easy
Steps
2
Time Required
2 - 3 minutes
Sections
1
- CMOS Battery
- 2 steps
Flags
0
BackDell Inspiron 17-3721
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
CMOS Battery
- Remove the two 6.5 mm PH1 Philips head screws on the back panel.
- Lift up the small panel from the top, using the plastic opening tools if necessary.
Remove the two 6.5 mm PH1 Philips head screws on the back panel.
Lift up the small panel from the top, using the plastic opening tools if necessary.
1024
Step 2
- Remove the CMOS battery with the plastic opening tools.
- Be careful while prying it open, the battery holder can break if you use too much force.
- Do not use metal tools when touching anything that can have an electric charge.
Remove the CMOS battery with the plastic opening tools.
Be careful while prying it open, the battery holder can break if you use too much force.
Do not use metal tools when touching anything that can have an electric charge.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Christopher Meninno
Member since: 03/20/2018
293 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S5-G3, Peak Spring 2018
Member of UMass Dartmouth, Team S5-G3, Peak Spring 2018
UMASSD-PEAK-S18S5G3
3 Members
7 Guides authored
