Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

3

  • Battery
  • 3 steps
  • Base Cover
  • 2 steps
  • CPU Heat Sink
  • 2 steps

Flags

0

  • BackDell Inspiron 15 (1545)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
  • Turn the laptop over to its back.

Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

Turn the laptop over to its back.

1024

Step 2

  • Slide the release latch while simultaneously pulling backwards on the battery.

Slide the release latch while simultaneously pulling backwards on the battery.

Step 3

  • Slide the battery out of the battery bay.

Slide the battery out of the battery bay.

Step 4

              Base Cover
  • Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.
  • The screws are connected to the base cover by a washer anddo not remove from the base cover.

Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.

The screws are connected to the base cover by a washer anddo not remove from the base cover.

Step 5

  • Carefully lift the base cover vertically away from the laptop.

Carefully lift the base cover vertically away from the laptop.

Step 6

              CPU Heat Sink
  • Loosen the 5 screws (4mm, Phillips #1) that secure the CPU Heat Sink to the motherboard.
  • These screws are held in place by a washer so you should not be able to completely remove the screws.

Loosen the 5 screws (4mm, Phillips #1) that secure the CPU Heat Sink to the motherboard.

These screws are held in place by a washer so you should not be able to completely remove the screws.

Step 7

  • Pull up on the Heat Sink unit to remove it.

Pull up on the Heat Sink unit to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 3 other contributors 


                    Nathan Lemay

Member since: 04/16/2014

2,959 Reputation

                                      15 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 9-14, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 9-14, Regan Spring 2014 



                    CPSU-REGAN-S14S9G14                     


                                            4 Members                     


                                            15 Guides authored