Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Bottom Cover
- 1 step
- RAM
- 2 steps
Flags
0
BackDell Inspiron 1525
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the battery release switch on the bottom of the laptop.
Locate the battery release switch on the bottom of the laptop.
1024
Step 2
- Slide the battery release switch away from the lock symbol until you hear the battery click.
- Slide the battery towards the back of the laptop until it comes free.
Slide the battery release switch away from the lock symbol until you hear the battery click.
Slide the battery towards the back of the laptop until it comes free.
Step 3
Bottom Cover
- Remove/loosen the eight 4.80 mm Phillips #1 screws securing the bottom panel.
- The screws may only need to be loosened, as they are generally retained by plastic washers.
- Remove the bottom panel.
Remove/loosen the eight 4.80 mm Phillips #1 screws securing the bottom panel.
The screws may only need to be loosened, as they are generally retained by plastic washers.
Remove the bottom panel.
Step 4
RAM
- Push the white tabs on either side of the RAM chip outward. The chip should pop up a little.
- Carefully remove the RAM chip by pulling it out at a slight vertical angle.
Push the white tabs on either side of the RAM chip outward. The chip should pop up a little.
Carefully remove the RAM chip by pulling it out at a slight vertical angle.
Step 5
- Remove the lower RAM chip in the same fashion as the upper one.
Remove the lower RAM chip in the same fashion as the upper one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Miroslav Djuric
156,282 Reputation
144 Guides authored
Badges:
54
+51 more badges