Dell Inspiron 1525 Central Control Cover Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

2

• Battery
• 2 steps
• Central Control Cover
• 3 steps

Flags

0

• BackDell Inspiron 1525

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Locate the battery release switch on the bottom of the laptop.

Locate the battery release switch on the bottom of the laptop.

1024

Step 2

• Slide the battery release switch away from the lock symbol until you hear the battery click.
• Slide the battery towards the back of the laptop until it comes free.

Slide the battery release switch away from the lock symbol until you hear the battery click.

Slide the battery towards the back of the laptop until it comes free.

Step 3

              Central Control Cover               

• Remove the two 4.00 mm Phillips #1 screws from the battery tray.

Remove the two 4.00 mm Phillips #1 screws from the battery tray.

Step 4

• Insert the flat end of a spudger into the slot on the right side of the central control cover and pry it up.
• Carefully pull the central control cover up along its edges.
• Do not attempt to completely remove the cover, as it is still attached via a ribbon cable.

Insert the flat end of a spudger into the slot on the right side of the central control cover and pry it up.

Carefully pull the central control cover up along its edges.

Do not attempt to completely remove the cover, as it is still attached via a ribbon cable.

Step 5

• Peel back the silver tape securing the ribbon cable to the cover.
• Pull the small brown latch on the ribbon cable connector out.
• Disconnect the ribbon cable to completely free the central control cover.

Peel back the silver tape securing the ribbon cable to the cover.

Pull the small brown latch on the ribbon cable connector out.

Disconnect the ribbon cable to completely free the central control cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Miroslav Djuric                     

156,282 Reputation

                                      144 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges