Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
4
- Battery
- 1 step
- Hinge Cover
- 1 step
- Keyboard
- 2 steps
- Wireless Mini-Card
- 1 step
Flags
0
BackDell Inspiron 1501
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place the laptop facedown with the battery facing you.
- Push the switch above the battery to the right and hold it in that position.
- Lift the battery using the grip on the top and remove it from its socket.
Place the laptop facedown with the battery facing you.
Push the switch above the battery to the right and hold it in that position.
Lift the battery using the grip on the top and remove it from its socket.
1024
Step 2
Hinge Cover
- Open the laptop all the way, rotating the display so that it is level with the surface that you are working on.
- Insert the spudger underneath the groove on the right side of the hinge cover.
- Push up to pry the edge of the hinge cover out.
- Lift up to release the hinge cover from the laptop, working from right to left.
Open the laptop all the way, rotating the display so that it is level with the surface that you are working on.
Insert the spudger underneath the groove on the right side of the hinge cover.
Push up to pry the edge of the hinge cover out.
Lift up to release the hinge cover from the laptop, working from right to left.
Step 3
Keyboard
- Remove the two 5mm JIS #1 screws from the top of the keyboard.
- Lift the top of the keyboard up and pull the keyboard away from the laptop.
- Be sure not to break the ribbon connector that attaches the keyboard to the laptop.
Remove the two 5mm JIS #1 screws from the top of the keyboard.
Lift the top of the keyboard up and pull the keyboard away from the laptop.
Be sure not to break the ribbon connector that attaches the keyboard to the laptop.
Step 4
- Open the latch holding the ribbon from the top
- Remove the keyboard from the laptop.
Open the latch holding the ribbon from the top
Remove the keyboard from the laptop.
Step 5
Wireless Mini-Card
- Remove the two wires from their connections.
- Pull the metal tabs securing the wireless mini-card to the back of the laptop until the card pops up.
- Remove the wireless mini-card from the laptop.
Remove the two wires from their connections.
Pull the metal tabs securing the wireless mini-card to the back of the laptop until the card pops up.
Remove the wireless mini-card from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Don Dao
Member since: 03/01/2018
361 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S2-G4, Simcock Spring 2018
Member of UMass Dartmouth, Team S2-G4, Simcock Spring 2018
UMASSD-SIMCOCK-S18S2G4
4 Members
7 Guides authored
Peter Chapin - Oct 22, 2019
Reply
I have a computer like this. I have a problem that I have not been able to find a solution too. A few parts that support the screen are broken, and I need to know if I will not be able to replace the CPU in the future should I ever decide to cement these specific parts together.
Let me know if you need any more information!
Peter C.