Difficulty

Easy

Steps

4

Time Required

                          15 minutes            

Sections

2

  • Battery
  • 2 steps
  • Ram (Memory Module)
  • 2 steps

Flags

0

  • BackDell Inspiron 15-3541

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Make sure your laptop is powered off completely and is not connected to the charger.
  • Close the laptop and place it so that the back of the screen is lying flat on your work surface.
  • Slide both of the battery-release latches towards the outer edges of the laptop to unlock the battery flap.

Make sure your laptop is powered off completely and is not connected to the charger.

Close the laptop and place it so that the back of the screen is lying flat on your work surface.

Slide both of the battery-release latches towards the outer edges of the laptop to unlock the battery flap.

1024

Step 2

  • Lift the battery at an angle using your fingertips and remove it from the laptop.
  • Press and hold the power button for 5 seconds. This ensures that any remaining power will drain out of the computer.

Lift the battery at an angle using your fingertips and remove it from the laptop.

Press and hold the power button for 5 seconds. This ensures that any remaining power will drain out of the computer.

Step 3

              Ram  (Memory Module)               
  • Remove the bottom cover by removing the 4 mm screw using a PH-0 Phillips screwdriver that secures the base cover to the laptop base.
  • Using the plastic opening tool, pry the base cover from the base.
  • Slide the base cover towards you and remove it from the base. Put it aside.

Remove the bottom cover by removing the 4 mm screw using a PH-0 Phillips screwdriver that secures the base cover to the laptop base.

Using the plastic opening tool, pry the base cover from the base.

Slide the base cover towards you and remove it from the base. Put it aside.

Step 4

  • Using your fingertips, pry the vertical sides of the memory module apart until the piece pops out of place.
  • Slide the memory module out of its slot and lift it out of the laptop base.

Using your fingertips, pry the vertical sides of the memory module apart until the piece pops out of place.

Slide the memory module out of its slot and lift it out of the laptop base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Edward Pacheco                     

Member since: 03/06/2016

824 Reputation

                                      3 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       UMass Dartmouth, Team 5-8, Landers Spring 2016                        

                                                  Member of UMass Dartmouth, Team 5-8, Landers Spring 2016 



                    UMASSD-LANDERS-S16S5G8                     


                                            3 Members                     


                                            6 Guides authored