Difficulty

Easy

Steps

15

Time Required

                          2 - 9 minutes

Sections

1

  • Hard Drive
  • 15 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 15 Gaming 7577 keyboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Caution & Note
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
  • NOTE: The latch on the hard-drive locking connector is fragile. Pulling the latch forcefully may damage the hard-drive locking connector. Exercise care when handling the latch on the hard-drive locking connector.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

NOTE: The latch on the hard-drive locking connector is fragile. Pulling the latch forcefully may damage the hard-drive locking connector. Exercise care when handling the latch on the hard-drive locking connector.

1024

Step 2

              Disconnecting the Hard Drive Cable
  • Open the latch and disconnect the hard-drive cable from the system board.

Open the latch and disconnect the hard-drive cable from the system board.

Step 3

              Peeling the Hard Drive Cable
  • Peel off the hard-drive cable from the computer base.

Peel off the hard-drive cable from the computer base.

Step 4

              Remove the Screws
  • Remove the four screws (M2.5x3) that secure the hard-drive assembly to the computer base.

Remove the four screws (M2.5x3) that secure the hard-drive assembly to the computer base.

Step 5

              Lifting the Hard-Drive Assembly
  • Lift the hard-drive assembly, along with its cable, off the computer base.

Lift the hard-drive assembly, along with its cable, off the computer base.

Step 6

              Disconnect the Inteposer
  • Disconnect the interposer from the hard-drive assembly.

Disconnect the interposer from the hard-drive assembly.

Step 7

              Remove the Screws
  • Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Step 8

              Lifting the Hard Drive Bracket
  • Lift the hard-drive bracket off the hard drive.

Lift the hard-drive bracket off the hard drive.

Step 9

              Align the Screw Holes
  • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

Step 10

              Replace the Screws
  • Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Step 11

              Connect the Interposer
  • Connect the interposer to the hard-drive assembly.

Connect the interposer to the hard-drive assembly.

Step 12

              Align the Screw Holes
  • Align the screw holes on the hard-drive assembly with the screw holes on the computer base.

Align the screw holes on the hard-drive assembly with the screw holes on the computer base.

Step 13

              Replace the Screws
  • Replace the four screws (M2.5x3) that secure the hard-drive assembly to the computer base.

Replace the four screws (M2.5x3) that secure the hard-drive assembly to the computer base.

Step 14

              Adhering the Hard Drive Cable
  • Adhere the hard-drive cable to the computer base.

Adhere the hard-drive cable to the computer base.

Step 15

              Sliding the Hard Drive Cable
  • Slide the hard-drive cable into the connector on the system board and close the latch to secure the hard-drive cable.

Slide the hard-drive cable into the connector on the system board and close the latch to secure the hard-drive cable.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored