Difficulty
Moderate
Steps
12
Time Required
9 - 20 minutes
Sections
1
- Display Assembly
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 15-3541
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Screws
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer.
- Remove the screws that secure the display hinges to the palm-rest assembly and open the hinges to an angle of 90 degrees.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer.
Remove the screws that secure the display hinges to the palm-rest assembly and open the hinges to an angle of 90 degrees.
1024
Step 2
Note the Antenna Cable
- Note the antenna cable routing and remove the cable from its routing guides on the palm-rest assembly.
Note the antenna cable routing and remove the cable from its routing guides on the palm-rest assembly.
Step 3
Noting the Display Cable
- Note the display cable routing and remove the cable from its routing guides on the palm-rest assembly.
Note the display cable routing and remove the cable from its routing guides on the palm-rest assembly.
Step 4
Open the Assembly
- Open the palm-rest assembly.
Open the palm-rest assembly.
Step 5
Lifting the Palm-Rest Assembly
- Lift the palm-rest assembly at an angle off the display assembly.
Lift the palm-rest assembly at an angle off the display assembly.
Step 6
Placing the Display Assembly
- Place the display assembly on a clean, flat surface.
Place the display assembly on a clean, flat surface.
Step 7
Placing the Display Assembly
- Place the NEW display assembly on the palm-rest assembly.
Place the NEW display assembly on the palm-rest assembly.
Step 8
Close the Display Hinges
- Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
Step 9
Replace the Screws
- Replace the screws that secure the display hinges to the palm-rest assembly.
Replace the screws that secure the display hinges to the palm-rest assembly.
Step 10
Route the Display Cable
- Route the display cable through its routing guides on the palm-rest assembly.
Route the display cable through its routing guides on the palm-rest assembly.
Step 11
Routing the Antenna Cables
- Route the antenna cables through its routing guides on the palm-rest assembly.
Route the antenna cables through its routing guides on the palm-rest assembly.
Step 12
Close the Display
- Close the display and turn the computer over.
Close the display and turn the computer over.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored