Difficulty
Easy
Steps
5
Time Required
25 minutes
Sections
2
- Back Panel
- 2 steps
- Fan
- 3 steps
Flags
0
BackDell Inspiron 15 7579
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the ten 7.9 mm screws with the Phillips PH0 screwdriver.
Remove the ten 7.9 mm screws with the Phillips PH0 screwdriver.
1024
Step 2
- Insert metal spudger into a gap in between the back panel and the back of the screen.
- Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.
Insert metal spudger into a gap in between the back panel and the back of the screen.
Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.
Step 3
Fan
- Remove the two 7.9 mm screws from the fan with a Phillips #0 screwdriver.
Remove the two 7.9 mm screws from the fan with a Phillips #0 screwdriver.
Step 4
- Unplug the wires from the port.
- Be sure to pull from the plastic connector, not the wires.
Unplug the wires from the port.
Be sure to pull from the plastic connector, not the wires.
Step 5
- Carefully lift the fan out of the computer.
Carefully lift the fan out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Richard Parker
Member since: 09/20/2021
97 Reputation
1 Guide authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team 2-11, Eggleston Fall 2021
Member of The Citadel Military College of South Carolina, Team 2-11, Eggleston Fall 2021
CMCSC-EGGLESTON-F21S2G11
3 Members
3 Guides authored
