Dell Inspiron 15 7579 Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          4 - 5 minutes            

Sections

2

• Back Panel
• 2 steps
• Battery
• 2 steps

Flags

0

• BackDell Inspiron 15 7579

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Remove the ten 7.9 mm screws with the Phillips PH0 screwdriver.

Remove the ten 7.9 mm screws with the Phillips PH0 screwdriver.

1024

Step 2

• Insert metal spudger into a gap in between the back panel and the back of the screen.
• Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.

Insert metal spudger into a gap in between the back panel and the back of the screen.

Pry off the back panel using the metal spudger as a lever, and remove the back panel by lifting the rest off by hand.

Step 3

              Battery               

• Remove the two 7.8 mm long screws on the left side of the battery with the Phillips #1 screwdriver.

Remove the two 7.8 mm long screws on the left side of the battery with the Phillips #1 screwdriver.

Step 4

• Pull out the fabric clip that attaches the battery to the main board from the connector by hand.
• Remove the battery from the device.

Pull out the fabric clip that attaches the battery to the main board from the connector by hand.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Inaki Madrigal                     

Member since: 04/23/2018

730 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S24-G9, Maness Spring 2018                        

                                                  Member of Cal Poly, Team S24-G9, Maness Spring 2018 



                    CPSU-MANESS-S18S24G9                     


                                            4 Members                     


                                            6 Guides authored                     

Thomas Keats - Oct 5, 2019

Reply

Thanks! Very helpful and to the point!

You ARE TECHNICALLY missing one step however, removing the fabric ribbon from the old battery at the end. Yes, it seems like common sense but…

Anyways, thanks.

andrew.w.holness - Jun 7, 2020

Reply

Thanks for the help, worked well.

Remember the connector needs to be removed from the old battery and re-installed in the new. I used a small slotted screwdriver.

A. Holness

June 7, 2020