Difficulty
Moderate
Steps
4
Time Required
4 minutes
Sections
2
- Back Cover
- 1 step
- Fan
- 3 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackDell Inspiron 15-7569
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver.
- After removing the screws, remove the back cover using a plastic or metal spudger.
Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver.
After removing the screws, remove the back cover using a plastic or metal spudger.
1024
Step 2
Fan
- Use a plastic opening tool to unclip the connector that attaches the fan to the motherboard.
Use a plastic opening tool to unclip the connector that attaches the fan to the motherboard.
Step 3
- Remove the 3.7mm long screws holding the fan in place with a Phillips #0 screwdriver.
- Remove the second 3.7mm long screws holding the fan in place with a Phillips #0 screwdriver.
Remove the 3.7mm long screws holding the fan in place with a Phillips #0 screwdriver.
Remove the second 3.7mm long screws holding the fan in place with a Phillips #0 screwdriver.
Step 4
- Gently remove the fan.
Gently remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Lucas Fisher
Member since: 04/01/2019
211 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S2-G1, Harley Spring 2019
Member of IUPUI, Team S2-G1, Harley Spring 2019
IUPUI-HARLEY-S19S2G1
3 Members
2 Guides authored