Dell Inspiron 15 7567 Ram Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          5 - 8 minutes            

Sections

2

• Battery
• 6 steps
• RAM
• 3 steps

Flags

0

• BackDell Inspiron 15-7567

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off laptop before beginning.
• Place the laptop upside down on a flat, stable surface.

Turn off laptop before beginning.

Place the laptop upside down on a flat, stable surface.

1024

Step 2

• Remove the 3mm screw in the location shown, using a Phillips #1 screwdriver.

Remove the 3mm screw in the location shown, using a Phillips #1 screwdriver.

Step 3

• Remove the panel from the sides and pull it out at an angle towards you.

Remove the panel from the sides and pull it out at an angle towards you.

Step 4

• Remove the five 3mm screws on the battery with a Torx (T8) screwdriver in the locations shown.

Remove the five 3mm screws on the battery with a Torx (T8) screwdriver in the locations shown.

Step 5

• Disconnect the power cord from the battery by using a pair of tweezers, your fingers, or the opening tools from the iFixit pro tech tool kit.
• Pinch the clips on the left and right side while pulling on the cord at the same time.

Disconnect the power cord from the battery by using a pair of tweezers, your fingers, or the opening tools from the iFixit pro tech tool kit.

Pinch the clips on the left and right side while pulling on the cord at the same time.

Step 6

• Pull the battery towards you.
• Make sure to pull at an upward angle.

Pull the battery towards you.

Make sure to pull at an upward angle.

Step 7

              RAM               

• Remove the 3mm screw on the back using a Phillips #1 screwdriver.

Remove the 3mm screw on the back using a Phillips #1 screwdriver.

Step 8

• Remove the panel by lifting up the side towards you

Remove the panel by lifting up the side towards you

Step 9

• Release the two clips on the left and right side, by pushing outward on the side towards you.
• The RAM strip will extend out. Pull towards you at a slight angle.

Release the two clips on the left and right side, by pushing outward on the side towards you.

The RAM strip will extend out. Pull towards you at a slight angle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    James Bedortha                     

Member since: 09/28/2018

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Oregon Institute of Technology, Team S1-G1, Lancaster Fall 2018                        

                                                  Member of Oregon Institute of Technology, Team S1-G1, Lancaster Fall 2018 



                    OIT-LANCASTER-F18S1G1                     


                                            3 Members                     


                                            5 Guides authored