Difficulty
Moderate
Steps
4
Time Required
30 minutes
Sections
1
- CPU Fan
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Inspiron 15 7560
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
CPU Fan
- Power off the laptop and place the laptop with the bottom facing upwards.
- Remove eight 5 mm screws from the bottom of the laptop.
- Loosen the three captive screws.
- Use an iFixit opening tool to pry the bottom cover away from the laptop.
Power off the laptop and place the laptop with the bottom facing upwards.
Remove eight 5 mm screws from the bottom of the laptop.
Loosen the three captive screws.
Use an iFixit opening tool to pry the bottom cover away from the laptop.
1024
Step 2
- Remove the two screws surrounding the fan.
Remove the two screws surrounding the fan.
Step 3
- Remove the black insulating tape from the fan connector.
- Pinch the sides of the white fan connector with your thumb and index fingernail and pull it out of its socket.
Remove the black insulating tape from the fan connector.
Pinch the sides of the white fan connector with your thumb and index fingernail and pull it out of its socket.
Step 4
- Remove the fan from the laptop.
Remove the fan from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
yue gong
Claire Miesch
Marty Rippens
Kristen Gismondi
and 3 others…
+3
Author
with 3 other contributors
yue gong
Member since: 01/15/2022
149 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
York University, Team 1-4, O'Regan Winter 2022
Member of York University, Team 1-4, O'Regan Winter 2022
YORK-O'REGAN-W22S1G4
1 Member
2 Guides authored
