Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Back Panel
  • 3 steps
  • SSD
  • 3 steps

Flags

0

  • BackDell Inspiron 15-7559

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Turn off the computer.
  • Disconnect the charging cable from the computer.
  • Failure to turn off the device and disconnect the cable could lead to personal injury or device damage.
  • Flip the computer upside down.

Turn off the computer.

Disconnect the charging cable from the computer.

Failure to turn off the device and disconnect the cable could lead to personal injury or device damage.

Flip the computer upside down.

1024

Step 2

  • Remove the captive screw located on the top section of the back panel, using a Philips #1 screwdriver.
  • Keep in mind that the screw cannot be fully removed from the panel, even when fully loosened.

Remove the captive screw located on the top section of the back panel, using a Philips #1 screwdriver.

Keep in mind that the screw cannot be fully removed from the panel, even when fully loosened.

Step 3

  • Use the blue, plastic opening tool to gently pry a section of the back panel open.
  • Next slide the opening tool around the back panel to disconnect the clips holding the panel in place.
  • After the clips have been disconnected, the back panel can then be easily lifted off the computer.

Use the blue, plastic opening tool to gently pry a section of the back panel open.

Next slide the opening tool around the back panel to disconnect the clips holding the panel in place.

After the clips have been disconnected, the back panel can then be easily lifted off the computer.

Step 4

              SSD
  • Locate the SSD, it is located in the center on the far left.

Locate the SSD, it is located in the center on the far left.

Step 5

  • Unscrew the 3mm Philips #1 screw that is holding the SSD in place.

Unscrew the 3mm Philips #1 screw that is holding the SSD in place.

Step 6

  • Gently pull out the SSD, horizontally along the computer to remove it.

Gently pull out the SSD, horizontally along the computer to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Trenton Greevebiester

Member since: 10/19/2017

1,536 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       UW Tacoma, Team S3-G2, Liner Fall 2017                        

                                                  Member of UW Tacoma, Team S3-G2, Liner Fall 2017 



                    UWT-LINER-F17S3G2                     


                                            5 Members                     


                                            9 Guides authored

Russell Andres - Feb 19, 2019

Reply