Difficulty

Easy

Steps

7

Time Required

                          5 - 7 minutes

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 2 steps
  • Speaker
  • 3 steps

Flags

0

  • BackDell Inspiron 15-7548

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.
  • Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.
  • The four screws on the bottom are captive screws and cannot be removed.

Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.

Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.

The four screws on the bottom are captive screws and cannot be removed.

1024

Step 2

  • Pry out the back panel using the flat head side of the spudger.
  • Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.

Pry out the back panel using the flat head side of the spudger.

Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.

Step 3

              Battery
  • Disconnect the battery from the motherboard by pulling the black tab attached to the cable.

Disconnect the battery from the motherboard by pulling the black tab attached to the cable.

Step 4

  • Remove the four 2.5x6mm screws using a Phillips #1 screwdriver.

Remove the four 2.5x6mm screws using a Phillips #1 screwdriver.

Step 5

              Speaker
  • Remove the ribbon cable by pulling it out.

Remove the ribbon cable by pulling it out.

Step 6

  • Remove the compression caps by using the spudger.

Remove the compression caps by using the spudger.

Step 7

  • Untangle the wire from the plastic clips and remove the speakers from the device.

Untangle the wire from the plastic clips and remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    brianna cordoway

Member since: 09/26/2018

127 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of North Texas, Team S7-G3, Thompson Fall 2018                        

                                                  Member of University of North Texas, Team S7-G3, Thompson Fall 2018 



                    UNT-THOMPSON-F18S7G3                     


                                            3 Members                     


                                            5 Guides authored