Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 2 steps
  • RAM
  • 4 steps

Flags

0

  • BackDell Inspiron 15-7548

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before upgrading your RAM sticks, make sure all your laptop software is up to date. This could be another reason your computer is not operating at peak efficiency.

Before beginning, make sure to power off your laptop completely, and disconnect the laptop from any external power source.

What you need

Step 1

              Back Panel
  • Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.
  • Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.
  • The four screws on the bottom are captive screws and cannot be removed.

Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.

Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.

The four screws on the bottom are captive screws and cannot be removed.

1024

Step 2

  • Pry out the back panel using the flat head side of the spudger.
  • Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.

Pry out the back panel using the flat head side of the spudger.

Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.

Step 3

              RAM
  • Pull the clips away from the side of the RAM stick.

Pull the clips away from the side of the RAM stick.

Step 4

  • Lift the RAM up and away from the motherboard.

Lift the RAM up and away from the motherboard.

Step 5

  • If there is a second RAM stick, pull the clips away from the side of the RAM stick.

If there is a second RAM stick, pull the clips away from the side of the RAM stick.

Step 6

  • Lift the RAM stick up and away from the motherboard.

Lift the RAM stick up and away from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Michael Nunez

Member since: 04/12/2022

325 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team 3-3, Beck Spring 2022                        

                                                  Member of IUPUI, Team 3-3, Beck Spring 2022 



                    IUPUI-BECK-S22S3G3                     


                                            4 Members                     


                                            2 Guides authored