Difficulty
Easy
Steps
2
Time Required
4 - 5 minutes
Sections
1
- Back Panel
- 2 steps
Flags
0
BackDell Inspiron 15-7548
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.
- Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.
- The four screws on the bottom are captive screws and cannot be removed.
Remove the six 6 mm screws from the back panel with a Phillips #1 screwdriver.
Loosen the four captive screws at the bottom using a Phillips #1 screwdriver.
The four screws on the bottom are captive screws and cannot be removed.
1024
Step 2
- Pry out the back panel using the flat head side of the spudger.
- Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.
Pry out the back panel using the flat head side of the spudger.
Do not insert the spudger more than half an inch when separating the bottom and right side of the back panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Christopher Fisher
Member since: 09/26/2018
379 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
University of North Texas, Team S7-G3, Thompson Fall 2018
Member of University of North Texas, Team S7-G3, Thompson Fall 2018
UNT-THOMPSON-F18S7G3
3 Members
5 Guides authored