Difficulty
Easy
Steps
5
Time Required
6 - 7 minutes
Sections
2
- Bottom Cover
- 2 steps
- RAM
- 3 steps
Flags
0
BackDell Inspiron 15-7547
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Before you begin, be sure to turn off your laptop and unplug it from the outlet.
- Close the display and flip the laptop on its back.
- Loosen the ten 5.0 mm-long Phillips #0 screws.
- The four screws marked with orange will remain captive to the cover.
Before you begin, be sure to turn off your laptop and unplug it from the outlet.
Close the display and flip the laptop on its back.
Loosen the ten 5.0 mm-long Phillips #0 screws.
The four screws marked with orange will remain captive to the cover.
1024
Step 2
- Use a spudger to pry up and loosen the back cover.
- Remove the back cover.
Use a spudger to pry up and loosen the back cover.
Remove the back cover.
Step 3
RAM
- Remove the plastic heat spreader that covers the RAM sticks.
Remove the plastic heat spreader that covers the RAM sticks.
Step 4
- Release the clamps on each side of the RAM sticks by pushing away from the center.
- When done properly the RAM stick should pop up.
Release the clamps on each side of the RAM sticks by pushing away from the center.
When done properly the RAM stick should pop up.
Step 5
- Pull the RAM stick in a straight line out of the socket.
Pull the RAM stick in a straight line out of the socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Claro
Member since: 09/10/2018
576 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
Appalachian State University, Team S2-G4, Menagarishvili Fall 2018
Member of Appalachian State University, Team S2-G4, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S2G4
3 Members
10 Guides authored
