Difficulty

Moderate

Steps

9

Time Required

                          25 - 30 minutes

Sections

3

  • Bottom Cover
  • 2 steps
  • WiFi Card
  • 3 steps
  • LCD Assembly
  • 4 steps

Flags

0

  • BackDell Inspiron 15-7547

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover
  • Before you begin, be sure to turn off your laptop and unplug it from the outlet.
  • Close the display and flip the laptop on its back.
  • Loosen the ten 5.0 mm-long Phillips #0 screws.
  • The four screws marked with orange will remain captive to the cover.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Close the display and flip the laptop on its back.

Loosen the ten 5.0 mm-long Phillips #0 screws.

The four screws marked with orange will remain captive to the cover.

1024

Step 2

  • Use a spudger to pry up and loosen the back cover.
  • Remove the back cover.

Use a spudger to pry up and loosen the back cover.

Remove the back cover.

Step 3

              WiFi Card
  • Remove the 3.0 mm-long Philips #0 screw at the end of the Wifi-Card

Remove the 3.0 mm-long Philips #0 screw at the end of the Wifi-Card

Step 4

  • Remove the Wifi-Card from its socket by pulling away and up from the connector.

Remove the Wifi-Card from its socket by pulling away and up from the connector.

Step 5

  • Disconnect the white and black cables from the Wifi-Card.
  • Make a note of which wire goes where for reconnecting them to the replacement card.

Disconnect the white and black cables from the Wifi-Card.

Make a note of which wire goes where for reconnecting them to the replacement card.

Step 6

              LCD Assembly
  • Remove the six 7.0 mm-long Philips #0 screws that mount the hinges.

Remove the six 7.0 mm-long Philips #0 screws that mount the hinges.

Step 7

  • Use a spudger to unlatch and unplug the display cable.
  • There will be a notch on the side of the connector.

Use a spudger to unlatch and unplug the display cable.

There will be a notch on the side of the connector.

Step 8

  • Raise the left and right hinges.

Raise the left and right hinges.

Step 9

  • Remove the LCD display assembly from the laptop.

Remove the LCD display assembly from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Kevin Smith

Member since: 09/10/2018

321 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Appalachian State University, Team S2-G4, Menagarishvili Fall 2018                        

                                                  Member of Appalachian State University, Team S2-G4, Menagarishvili Fall 2018 



                    APSU-MENAGARISHVILI-F18S2G4                     


                                            3 Members                     


                                            10 Guides authored