Difficulty
Easy
Steps
5
Time Required
7 - 9 minutes
Sections
2
- Bottom Cover
- 2 steps
- CPU Fan
- 3 steps
Flags
0
BackDell Inspiron 15-7547
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Before you begin, be sure to turn off your laptop and unplug it from the outlet.
- Close the display and flip the laptop on its back.
- Loosen the ten 5.0 mm-long Phillips #0 screws.
- The four screws marked with orange will remain captive to the cover.
Before you begin, be sure to turn off your laptop and unplug it from the outlet.
Close the display and flip the laptop on its back.
Loosen the ten 5.0 mm-long Phillips #0 screws.
The four screws marked with orange will remain captive to the cover.
1024
Step 2
- Use a spudger to pry up and loosen the back cover.
- Remove the back cover.
Use a spudger to pry up and loosen the back cover.
Remove the back cover.
Step 3
CPU Fan
- Remove the two 5.0 mm-long Philips #0 screws from the fan.
- The screw marked in orange will remain captive to the fan.
Remove the two 5.0 mm-long Philips #0 screws from the fan.
The screw marked in orange will remain captive to the fan.
Step 4
- Disconnect the wire that connects the fan to the motherboard. This can be found under the flap directly to the left of the fan.
Disconnect the wire that connects the fan to the motherboard. This can be found under the flap directly to the left of the fan.
Step 5
- Lift the fan out of the chassis.
Lift the fan out of the chassis.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Isaac Brooks
Member since: 09/10/2018
343 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Appalachian State University, Team S2-G4, Menagarishvili Fall 2018
Member of Appalachian State University, Team S2-G4, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S2G4
3 Members
10 Guides authored