Difficulty

Moderate

Steps

5

Time Required

                          6 - 10 minutes

Sections

2

  • Bottom Cover
  • 2 steps
  • Battery
  • 3 steps

Flags

0

  • BackDell Inspiron 15-7547

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover
  • Before you begin, be sure to turn off your laptop and unplug it from the outlet.
  • Close the display and flip the laptop on its back.
  • Loosen the ten 5.0 mm-long Phillips #0 screws.
  • The four screws marked with orange will remain captive to the cover.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Close the display and flip the laptop on its back.

Loosen the ten 5.0 mm-long Phillips #0 screws.

The four screws marked with orange will remain captive to the cover.

1024

Step 2

  • Use a spudger to pry up and loosen the back cover.
  • Remove the back cover.

Use a spudger to pry up and loosen the back cover.

Remove the back cover.

Step 3

              Battery
  • Remove the five 5.0 mm-long Philips #0 screws that connect the battery to the case.

Remove the five 5.0 mm-long Philips #0 screws that connect the battery to the case.

Step 4

  • Lift the battery out of the case.

Lift the battery out of the case.

Step 5

  • Pull the battery cable’s pull tab towards the battery to disconnect it from the motherboard.
  • Pull parallel to the motherboard, not straight up.
  • Most of the cable is attached to the case with adhesive, which may cause slight resistance.
  • Remove the battery.

Pull the battery cable’s pull tab towards the battery to disconnect it from the motherboard.

Pull parallel to the motherboard, not straight up.

Most of the cable is attached to the case with adhesive, which may cause slight resistance.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Claro

Member since: 09/10/2018

576 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Appalachian State University, Team S2-G4, Menagarishvili Fall 2018                        

                                                  Member of Appalachian State University, Team S2-G4, Menagarishvili Fall 2018 



                    APSU-MENAGARISHVILI-F18S2G4                     


                                            3 Members                     


                                            10 Guides authored