Dell Inspiron 15 7537 Wireless Card Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes            

Sections

2

• Bottom Case
• 3 steps
• Wireless Card
• 3 steps

Flags

0

• BackDell Inspiron 15-7537

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Case               

• Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
• Loosen the two 5 mm Phillips #0 on the upper edge of the cover.
• These screws will stay captive to the case.

Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.

Loosen the two 5 mm Phillips #0 on the upper edge of the cover.

These screws will stay captive to the case.

1024

Step 2

• Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.

Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.

Step 3

• Use a spudger to remove the base cover from the rest of bottom cover.

Use a spudger to remove the base cover from the rest of bottom cover.

Step 4

              Remove the WiFi Card               

• Completely unscrew the 2 mm screw that connects the WiFi card to the mother board using a Philips head screwdriver.

Completely unscrew the 2 mm screw that connects the WiFi card to the mother board using a Philips head screwdriver.

Step 5

• Disconnect the two antennas (one black and one white) from the wireless card.

Disconnect the two antennas (one black and one white) from the wireless card.

Step 6

• Remove the WiFi card.
• To place a new WiFi card, connect the antenna cables to the WiFi card. The white cable goes to the white triangle, and the black cable goes to the black triangle.
• Avoid damaging the card by not placing any cables underneath the card.

Remove the WiFi card.

To place a new WiFi card, connect the antenna cables to the WiFi card. The white cable goes to the white triangle, and the black cable goes to the black triangle.

Avoid damaging the card by not placing any cables underneath the card.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jean Whitmore                     

Member since: 01/22/2015

972 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 18-2, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 18-2, Maness Winter 2015 



                    CPSU-MANESS-W15S18G2                     


                                            4 Members                     


                                            8 Guides authored