Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
2
- Bottom Case
- 3 steps
- RAM
- 2 steps
Flags
0
BackDell Inspiron 15-7537
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Case
- Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
- Loosen the two 5 mm Phillips #0 on the upper edge of the cover.
- These screws will stay captive to the case.
Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
Loosen the two 5 mm Phillips #0 on the upper edge of the cover.
These screws will stay captive to the case.
1024
Step 2
- Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
Step 3
- Use a spudger to remove the base cover from the rest of bottom cover.
Use a spudger to remove the base cover from the rest of bottom cover.
Step 4
RAM
- Gently pull apart clips on the ends of the memory module until the memory module pops up.
Gently pull apart clips on the ends of the memory module until the memory module pops up.
Step 5
- Pull the RAM out at a 45 degree angle.
Pull the RAM out at a 45 degree angle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Jean Whitmore
Member since: 01/22/2015
972 Reputation
7 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 18-2, Maness Winter 2015
Member of Cal Poly, Team 18-2, Maness Winter 2015
CPSU-MANESS-W15S18G2
4 Members
8 Guides authored
