Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Bottom Case
- 3 steps
Flags
0
BackDell Inspiron 15-7537
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Case
- Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
- Loosen the two 5 mm Phillips #0 on the upper edge of the cover.
- These screws will stay captive to the case.
Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
Loosen the two 5 mm Phillips #0 on the upper edge of the cover.
These screws will stay captive to the case.
1024
Step 2
- Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
Step 3
- Use a spudger to remove the base cover from the rest of bottom cover.
Use a spudger to remove the base cover from the rest of bottom cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Jean Whitmore
Member since: 01/22/2015
972 Reputation
7 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 18-2, Maness Winter 2015
Member of Cal Poly, Team 18-2, Maness Winter 2015
CPSU-MANESS-W15S18G2
4 Members
8 Guides authored
