Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • Bottom Cover
  • 4 steps
  • Wi-Fi Card
  • 1 step

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackDell Inspiron 15 5584

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Bottom Cover               
  • Make sure to turn off and unplug your laptop before starting.
  • Turn over the laptop so that the bottom is facing upwards, and the Inspiron logo is upside-down.

Make sure to turn off and unplug your laptop before starting.

Turn over the laptop so that the bottom is facing upwards, and the Inspiron logo is upside-down.

1024

Step 2

  • Remove the seven 7 mm screws from the bottom using a Phillips #0 screwdriver.
  • Loosen the two captive back corner screws using a Phillips #0 screwdriver.
  • The two corner screws are not removable. A clicking sounds indicates that the screw is fully loosened.

Remove the seven 7 mm screws from the bottom using a Phillips #0 screwdriver.

Loosen the two captive back corner screws using a Phillips #0 screwdriver.

The two corner screws are not removable. A clicking sounds indicates that the screw is fully loosened.

Step 3

  • Slide an iFixit opening tool underneath the right side USB port and the keyboard.
  • Gently trace the iFixit opening tool along the entire outer rim of the laptop, carefully applying an upwards pressure.
  • Be careful not to force open the plate or push too much off without loosening the other sides. This can cause the bottom cover to crack.

Slide an iFixit opening tool underneath the right side USB port and the keyboard.

Gently trace the iFixit opening tool along the entire outer rim of the laptop, carefully applying an upwards pressure.

Be careful not to force open the plate or push too much off without loosening the other sides. This can cause the bottom cover to crack.

Step 4

  • Gently pry off the bottom cover from the laptop.
  • Use the iFixit opening tool to loosen any spots you may have missed from Step 3.

Gently pry off the bottom cover from the laptop.

Use the iFixit opening tool to loosen any spots you may have missed from Step 3.

Step 5

              Wi-Fi Card               
  • Remove the single 3 mm screw that holds down the Wi-Fi card using a Phillips #0 screwdriver.
  • Remove the Wi-Fi card from the motherboard.

Remove the single 3 mm screw that holds down the Wi-Fi card using a Phillips #0 screwdriver.

Remove the Wi-Fi card from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Kristen Gismondi                     

Member since: 11/12/2014

69,397 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored