Difficulty

Moderate

Steps

8

Time Required

                          8 - 10 minutes

Sections

3

  • Bottom Cover
  • 4 steps
  • Battery
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackDell Inspiron 15 5584

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

RAM acts as a temporary memory bank in order to improve multitasking and overall device performance. Without RAM, your computer would be unable to run or process information, resulting in the computer not being able boot up.

Before tampering with your device, make sure to drain the battery and turn off your laptop. As RAM is directly ported into the motherboard, careless removal may result in your motherboard breaking. Exercise caution when working with sensitive electronic components.

What you need

Step 1

              Bottom Cover
  • Make sure to turn off and unplug your laptop before starting.
  • Turn over the laptop so that the bottom is facing upwards, and the Inspiron logo is upside-down.

Make sure to turn off and unplug your laptop before starting.

Turn over the laptop so that the bottom is facing upwards, and the Inspiron logo is upside-down.

1024

Step 2

  • Remove the seven 7 mm screws from the bottom using a Phillips #0 screwdriver.
  • Loosen the two captive back corner screws using a Phillips #0 screwdriver.
  • The two corner screws are not removable. A clicking sounds indicates that the screw is fully loosened.

Remove the seven 7 mm screws from the bottom using a Phillips #0 screwdriver.

Loosen the two captive back corner screws using a Phillips #0 screwdriver.

The two corner screws are not removable. A clicking sounds indicates that the screw is fully loosened.

Step 3

  • Slide an iFixit opening tool underneath the right side USB port and the keyboard.
  • Gently trace the iFixit opening tool along the entire outer rim of the laptop, carefully applying an upwards pressure.
  • Be careful not to force open the plate or push too much off without loosening the other sides. This can cause the bottom cover to crack.

Slide an iFixit opening tool underneath the right side USB port and the keyboard.

Gently trace the iFixit opening tool along the entire outer rim of the laptop, carefully applying an upwards pressure.

Be careful not to force open the plate or push too much off without loosening the other sides. This can cause the bottom cover to crack.

Step 4

  • Gently pry off the bottom cover from the laptop.
  • Use the iFixit opening tool to loosen any spots you may have missed from Step 3.

Gently pry off the bottom cover from the laptop.

Use the iFixit opening tool to loosen any spots you may have missed from Step 3.

Step 5

              Battery
  • Remove the four 3.5 mm screws holding the battery down with a JIS #0 screwdriver.

Remove the four 3.5 mm screws holding the battery down with a JIS #0 screwdriver.

Step 6

  • Detach the motherboard connector tab from the top left of the battery.
  • Remove the battery from the device.
  • Be sure to carefully wiggle the connector out from the battery socket. Ripping it out too forcefully could damage the socket.

Detach the motherboard connector tab from the top left of the battery.

Remove the battery from the device.

Be sure to carefully wiggle the connector out from the battery socket. Ripping it out too forcefully could damage the socket.

Step 7

              RAM
  • Firmly apply pressure on the two latches to the right and left of the RAM stick.

Firmly apply pressure on the two latches to the right and left of the RAM stick.

Step 8

  • At an angle, gently pull the RAM stick out of the socket.
  • Remove the RAM stick from the motherboard socket.

At an angle, gently pull the RAM stick out of the socket.

Remove the RAM stick from the motherboard socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Sam Vorn

Member since: 03/29/2022

920 Reputation

                                      9 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team 1-1, Mellen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-1, Mellen Spring 2022 



                    UMASSD-MELLEN-S22S1G1                     


                                            3 Members                     


                                            10 Guides authored