Difficulty
Easy
Steps
12
Time Required
2 - 9 minutes
Sections
1
- Hard Drive
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 15 5576 Gaming Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disconnecting the Hard Drive Cable
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
- Using the pull-tab, disconnect the hard-drive cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Using the pull-tab, disconnect the hard-drive cable from the system board.
1024
Step 2
Remove the Screws
- Remove the four screws (M2x5) that secure the hard-drive assembly to the computer base.
Remove the four screws (M2x5) that secure the hard-drive assembly to the computer base.
Step 3
Lifting the Hard Drive Assembly
- Lift the hard-drive assembly, along with its cable, off the computer base.
Lift the hard-drive assembly, along with its cable, off the computer base.
Step 4
Disconnect the Interposer
- Disconnect the interposer from the hard-drive assembly.
Disconnect the interposer from the hard-drive assembly.
Step 5
Remove the Screws
- Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Step 6
Remove the Hard Drive Bracket
- Remove the hard-drive bracket off the hard drive.
Remove the hard-drive bracket off the hard drive.
Step 7
Align the Screw Holes
- Align the screw holes on the NEW hard-drive bracket with the screw holes on the hard drive.
Align the screw holes on the NEW hard-drive bracket with the screw holes on the hard drive.
Step 8
Replace the Screws
- Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Step 9
Connect the Interposer
- Connect the interposer to the hard-drive assembly.
Connect the interposer to the hard-drive assembly.
Step 10
Align the Screw Holes
- Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
Step 11
Replace the Screws
- Replace the four screws (M2x5) that secure the hard-drive assembly to the computer base.
Replace the four screws (M2x5) that secure the hard-drive assembly to the computer base.
Step 12
Connect the Hard Drive Cable
- Connect the hard-drive cable to the connector on the system board.
Connect the hard-drive cable to the connector on the system board.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored