Difficulty

Easy

Steps

15

Time Required

                          4 - 9 minutes

Sections

1

  • Display Assembly
  • 15 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 15 5576 Gaming Laptop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Align the Screw Holes
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Close the display and turn the computer over.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Close the display and turn the computer over.

1024

Step 2

              Disconnecting the Display Cable
  • Using the pull tab, disconnect the display cable from the system board.

Using the pull tab, disconnect the display cable from the system board.

Step 3

              Note the Display Cable
  • Note the display-cable routing and remove the cable from the routing guides on the computer base.

Note the display-cable routing and remove the cable from the routing guides on the computer base.

Step 4

              Disconnecting the Antenna Cables
  • Disconnect the antenna cables from the wireless card.

Disconnect the antenna cables from the wireless card.

Step 5

              Note the Antenna Cable Routing
  • Note the antenna-cable routing and remove the antenna cables from the routing guides on the computer base.

Note the antenna-cable routing and remove the antenna cables from the routing guides on the computer base.

Step 6

              Sliding the Display Cable
  • Slide the display cable and antenna cables through the slots on the computer base.

Slide the display cable and antenna cables through the slots on the computer base.

Step 7

              Remove the Screws
  • Remove the four screws (M2x5) that secure the display assembly to the computer base.

Remove the four screws (M2x5) that secure the display assembly to the computer base.

Step 8

              Lifting the Display Assembly
  • Lift the display assembly off the computer base.

Lift the display assembly off the computer base.

Step 9

              Align the Screw Holes
  • Align the screw holes on the NEW display assembly with the screw holes on the computer base.

Align the screw holes on the NEW display assembly with the screw holes on the computer base.

Step 10

              Replace the Screws
  • Replace the four screws (M2x5) that secure the display assembly to the computer base.

Replace the four screws (M2x5) that secure the display assembly to the computer base.

Step 11

              Sliding the Display Cable
  • Slide the display cable and antenna cables through the slot on the computer base.

Slide the display cable and antenna cables through the slot on the computer base.

Step 12

              Route the Display Cable
  • Close the display and turn the computer over.
  • Route the display cable and antenna cables through the routing guides on the computer base.

Route the display cable and antenna cables through the routing guides on the computer base.

Step 13

              Connect the Antenna Cables
  • Connect the antenna cables to the wireless card.

Connect the antenna cables to the wireless card.

Step 14

              Connecting the Display Cable
  • Connect the display cable to the system board.

Connect the display cable to the system board.

Step 15

              Close the Display
  • Close the display and turn the computer over.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored