Dell Inspiron 15 5567 Wireless Card Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 7 minutes

Sections

Back Cover
3 steps
Wireless Card
2 steps

Flags

BackDell Inspiron 15-5567
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Orient the laptop with the back cover facing upward and the INSPIRON engraving reads legible (not flipped).
Remove 13 M2.5x8mm screws using a Philips #0 screwdriver.
Remove two M2x4mm screws using the same screwdriver.

Orient the laptop with the back cover facing upward and the INSPIRON engraving reads legible (not flipped).

Remove 13 M2.5x8mm screws using a Philips #0 screwdriver.

Remove two M2x4mm screws using the same screwdriver.

1024

Step 2

Insert the blue plastic opening tool into the crease of the CD driver, and pop it open.
Slide the rest of it out with your hand.

Insert the blue plastic opening tool into the crease of the CD driver, and pop it open.

Slide the rest of it out with your hand.

Step 3

Remove three M2x2mm screws underneath the CD driver with the same Philips #0 screwdriver.
Place the blue plastic opening tool in the crease of the cover and push it upward to open the back cover.
Grab the corners of the cover firmly and lift it up.
Some parts are weaker than others; open it gently from corners.

Remove three M2x2mm screws underneath the CD driver with the same Philips #0 screwdriver.

Place the blue plastic opening tool in the crease of the cover and push it upward to open the back cover.

Grab the corners of the cover firmly and lift it up.

Some parts are weaker than others; open it gently from corners.

Step 4

              Wireless Card

Remove one M2x3mm screw from the bracket holding the card using a Phillips #0 screwdriver.
Lift and remove the bracket with your hand.

Remove one M2x3mm screw from the bracket holding the card using a Phillips #0 screwdriver.

Lift and remove the bracket with your hand.

Step 5

Disconnect the antennae cables connected to the card using the opening tool.
Slide the wireless card off of its socket and lift it with your hand and remove it.

Disconnect the antennae cables connected to the card using the opening tool.

Slide the wireless card off of its socket and lift it with your hand and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Sattam Bakolka

Member since: 01/14/2020

645 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Embry-Riddle Aeronautical University, Team S16-G1, Branham Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S16-G1, Branham Spring 2020 



                    ERAU-BRANHAM-S20S16G1                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team