Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes

Sections

3

  • Back Cover
  • 3 steps
  • Battery
  • 4 steps
  • Speakers
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 15-5567

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Orient the laptop with the back cover facing upward and the INSPIRON engraving reads legible (not flipped).
  • Remove 13 M2.5x8mm screws using a Philips #0 screwdriver.
  • Remove two M2x4mm screws using the same screwdriver.

Orient the laptop with the back cover facing upward and the INSPIRON engraving reads legible (not flipped).

Remove 13 M2.5x8mm screws using a Philips #0 screwdriver.

Remove two M2x4mm screws using the same screwdriver.

1024

Step 2

  • Insert the blue plastic opening tool into the crease of the CD driver, and pop it open.
  • Slide the rest of it out with your hand.

Insert the blue plastic opening tool into the crease of the CD driver, and pop it open.

Slide the rest of it out with your hand.

Step 3

  • Remove three M2x2mm screws underneath the CD driver with the same Philips #0 screwdriver.
  • Place the blue plastic opening tool in the crease of the cover and push it upward to open the back cover.
  • Grab the corners of the cover firmly and lift it up.
  • Some parts are weaker than others; open it gently from corners.

Remove three M2x2mm screws underneath the CD driver with the same Philips #0 screwdriver.

Place the blue plastic opening tool in the crease of the cover and push it upward to open the back cover.

Grab the corners of the cover firmly and lift it up.

Some parts are weaker than others; open it gently from corners.

Step 4

              Remove the Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Remove the screws that secure the battery bracket to the system board and palm rest and keyboard assembly.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Remove the screws that secure the battery bracket to the system board and palm rest and keyboard assembly.

Step 5

              Removing the Battery Bracket
  • Lift and remove the battery bracket.

Lift and remove the battery bracket.

Step 6

              Remove the Screw
  • Remove the screw that secures the battery to the palm rest and keyboard assembly.
  • Note the location of the screw that secures the battery to the palm rest and keyboard assembly.

Remove the screw that secures the battery to the palm rest and keyboard assembly.

Note the location of the screw that secures the battery to the palm rest and keyboard assembly.

Step 7

              Lifting the Battery
  • Lift the battery off the palm rest and keyboard assembly.

Lift the battery off the palm rest and keyboard assembly.

Step 8

              Speakers
  • Remove the cable by using the blue plastic opening tool.
  • Lift the first speaker gently and remove it.

Remove the cable by using the blue plastic opening tool.

Lift the first speaker gently and remove it.

Step 9

  • Lift the other speaker gently and remove it.

Lift the other speaker gently and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Sattam Bakolka

Member since: 01/14/2020

645 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Embry-Riddle Aeronautical University, Team S16-G1, Branham Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S16-G1, Branham Spring 2020 



                    ERAU-BRANHAM-S20S16G1                     


                                            3 Members                     


                                            6 Guides authored