Difficulty
Easy
Steps
12
Time Required
3 - 10 minutes
Sections
1
- Hard Drive
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 15-5565
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lifting the Latch
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
- Lift the latch and using the pull tab, disconnect the hard-drive cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Lift the latch and using the pull tab, disconnect the hard-drive cable from the system board.
1024
Step 2
Remove the Screws
- Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
Step 3
Lifting the Hard Drive Assembly
- Lift the hard-drive assembly along with its cable off the palm rest and keyboard assembly.
Lift the hard-drive assembly along with its cable off the palm rest and keyboard assembly.
Step 4
Disconnecting the Interposer
- Disconnect the interposer from the hard-drive assembly.
Disconnect the interposer from the hard-drive assembly.
Step 5
Remove the Screws
- Remove the screws that secure the hard-drive bracket to the hard drive.
Remove the screws that secure the hard-drive bracket to the hard drive.
Step 6
Lifting the Hard Drive
- Lift the hard drive off the hard-drive bracket.
Lift the hard drive off the hard-drive bracket.
Step 7
Align the Screw Holes
- Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.
Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.
Step 8
Replace the Screws
- Replace the screws that secure the hard-drive bracket to the hard drive.
Replace the screws that secure the hard-drive bracket to the hard drive.
Step 9
Connecting the Interposer
- Connect the interposer to the hard-drive assembly.
Connect the interposer to the hard-drive assembly.
Step 10
Align the Screw Holes
- Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.
Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.
Step 11
Replace the Screws
- Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
Step 12
Connect the Hard Drive Cable
- Connect the hard-drive cable to the system board and close the latch to secure the cable.
Connect the hard-drive cable to the system board and close the latch to secure the cable.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored