Difficulty
Moderate
Steps
12
Time Required
10 - 25 minutes
Sections
1
- Display Assembly
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 15-5565
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Battery Cable
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- Remove the battery cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
Remove the battery cable from the system board.
1024
Step 2
Remove the Display Cable
- Note the display cable routing and remove the cable from its routing guides.
Note the display cable routing and remove the cable from its routing guides.
Step 3
Disconnect the Display Cable
- Lift the latch and disconnect the display cable from the system board.
Lift the latch and disconnect the display cable from the system board.
Step 4
Remove the Screws
- Remove the screws that secure the display hinges to the palm rest and keyboard assembly.
Remove the screws that secure the display hinges to the palm rest and keyboard assembly.
Step 5
Open the Display Hinges
- Open the display hinges.
Open the display hinges.
Step 6
Lifting the Assembly
- Lift the palm rest and keyboard assembly off the display assembly.
Lift the palm rest and keyboard assembly off the display assembly.
Step 7
Placing the Palm Rest
- Place the palm rest and keyboard assembly on the NEW display assembly.
Place the palm rest and keyboard assembly on the NEW display assembly.
Step 8
Press the Hinges Down
- Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
Step 9
Replace the Screws
- Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
Step 10
Routing the Display Cable
- Route the display cable through the routing guides on the palm rest and keyboard.
Route the display cable through the routing guides on the palm rest and keyboard.
Step 11
Sliding the Display Cable
- Slide the display cable to the connector on the system board and close the latch to secure the cable.
Slide the display cable to the connector on the system board and close the latch to secure the cable.
Step 12
Sliding the Battery Cable
- Slide the battery cable to the connector on the system board.
Slide the battery cable to the connector on the system board.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored