Difficulty
Easy
Steps
3
Time Required
2 - 3 minutes
Sections
2
- Back Panel
- 2 steps
- RAM
- 1 step
Flags
0
BackDell Inspiron 15-5559
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.
Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.
1024
Step 2
- Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.
- Do not be afraid to use a bit of muscle, as the panel does not come off without some force.
Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.
Do not be afraid to use a bit of muscle, as the panel does not come off without some force.
Step 3
RAM
- Place a finger on each of the 2 metal prongs on either side of the RAM stick and apply light pressure to release the RAM stick.
- Remove the first stick of RAM. Repeat this process for the second RAM stick.
Place a finger on each of the 2 metal prongs on either side of the RAM stick and apply light pressure to release the RAM stick.
Remove the first stick of RAM. Repeat this process for the second RAM stick.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kyla Ward
Member since: 03/19/2018
559 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Baylor, Team S5-G5, Williams Spring 2018
Member of Baylor, Team S5-G5, Williams Spring 2018
BU-WILLIAMS-S18S5G5
3 Members
5 Guides authored
