Dell Inspiron 15 5559 Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          9 - 10 minutes

Sections

Keyboard
4 steps

Flags

BackDell Inspiron 15-5559
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Use the metal spudger to pry the keyboard off. Do this by inserting the spudger into each of the five indicated slots at the top of the keyboard and gently pulling up on the keyboard with the spudger. Do not be afraid to use a bit of muscle to remove the keyboard, as it takes a bit of force to remove

Use the metal spudger to pry the keyboard off. Do this by inserting the spudger into each of the five indicated slots at the top of the keyboard and gently pulling up on the keyboard with the spudger. Do not be afraid to use a bit of muscle to remove the keyboard, as it takes a bit of force to remove

1024

Step 2

Once you have pried the keyboard off with the spudger, lift the keyboard upward with you hands.
It is important to note that the keyboard is still attached to the device with two flat connective cables. It is important that you gently remove the keyboard to prevent damaging the cables.

Once you have pried the keyboard off with the spudger, lift the keyboard upward with you hands.

It is important to note that the keyboard is still attached to the device with two flat connective cables. It is important that you gently remove the keyboard to prevent damaging the cables.

Step 3

Once the keyboard has been lifted you will notice two conductive tape cables. one large and one small.

Once the keyboard has been lifted you will notice two conductive tape cables. one large and one small.

Step 4

Disconnect the smaller of the two flat conductive tape cables.
Place a metal spudger on the end of the cable that is connected to the laptop and use it to lift the black clasp holding the tape down, then pull the cable out toward the right. Repeat for the second larger piece of conductive tape.
You should remove this flat connective cable with care to prevent damaging it.

Disconnect the smaller of the two flat conductive tape cables.

Place a metal spudger on the end of the cable that is connected to the laptop and use it to lift the black clasp holding the tape down, then pull the cable out toward the right. Repeat for the second larger piece of conductive tape.

You should remove this flat connective cable with care to prevent damaging it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Martin Lechuga

Member since: 03/18/2018

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Baylor, Team S5-G5, Williams Spring 2018                        

                                                  Member of Baylor, Team S5-G5, Williams Spring 2018 



                    BU-WILLIAMS-S18S5G5                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team