Difficulty
Moderate
Steps
11
Time Required
10 - 20 minutes
Sections
3
- Battery
- 4 steps
- Keyboard
- 4 steps
- CD-Drive
- 3 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Inspiron 15-5552
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure the laptop is powered down before you remove the battery.
Make sure the laptop is powered down before you remove the battery.
1024
Step 2
- Locate the battery release switch on the bottom of the laptop.
Locate the battery release switch on the bottom of the laptop.
Step 3
- Slide the battery release switch away from the lock symbol towards the “unlock” position.
- You can tell that the battery is unlocked once you hear a “click.”
Slide the battery release switch away from the lock symbol towards the “unlock” position.
You can tell that the battery is unlocked once you hear a “click.”
Step 4
- Rotate the battery outward by lifting the bottom lip that pops out.
- Continue rotating the battery towards the top of the laptop until the battery is completely removed.
Rotate the battery outward by lifting the bottom lip that pops out.
Continue rotating the battery towards the top of the laptop until the battery is completely removed.
Step 5
Keyboard
- Keyboard
- Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.
Keyboard
Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.
Step 6
- Lift the keyboard off of the computer. Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.
Lift the keyboard off of the computer. Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.
Step 7
- Flip the keyboard over onto the palm-rest assembly.
Flip the keyboard over onto the palm-rest assembly.
Step 8
- Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.
Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.
Step 9
CD-Drive
- CD-Drive
- Flip the computer over, screen down and unscrew the 1 screw in the middle located below the battery with a J0 bit tipped screwdriver.
CD-Drive
Flip the computer over, screen down and unscrew the 1 screw in the middle located below the battery with a J0 bit tipped screwdriver.
Step 10
- Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.
Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.
Step 11
- After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.
After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Chandler Champion
Member since: 01/23/2018
364 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
Western Carolina University, Team S1-G4, Virtue Spring 2018
Member of Western Carolina University, Team S1-G4, Virtue Spring 2018
WCU-VIRTUE-S18S1G4
4 Members
5 Guides authored