Difficulty
Easy
Steps
9
Time Required
10 minutes
Sections
3
- Before working inside Dell inspiron 15 5502
- 1 step
- Dell Inspiron 15 5502 Case Removal
- 5 steps
- Memory modules
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Inspiron 15 5502
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Before working inside Dell inspiron 15 5502
- Save and close all open files and exit all open applications.
- Shut down your computer. Click Start > Shut down.
- Disconnect your computer and all attached devices from their electrical outlets.
- Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
Save and close all open files and exit all open applications.
Shut down your computer. Click Start > Shut down.
Disconnect your computer and all attached devices from their electrical outlets.
Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
1024
Step 2
Screws
- In the back there are 9 screws.
- (captive) M2x7.5
- M2x4
- Unscrew these and store in a safe place. (eg: nescafe cup, container )
In the back there are 9 screws.
(captive) M2x7.5
M2x4
Unscrew these and store in a safe place. (eg: nescafe cup, container )
Step 3
Getting the base cover out
- Using a plastic scribe, pry the base cover starting from the recess at the display hinge and work your way around the sides to remove the base cover.
Using a plastic scribe, pry the base cover starting from the recess at the display hinge and work your way around the sides to remove the base cover.
Step 4
Lifting
- Lift the base cover off the palm-rest and keyboard assembly.
Lift the base cover off the palm-rest and keyboard assembly.
Step 5
Battery disconecting
- The sticker and the cable connector(below the sticker)
- Peel the tape and disconnect the battery cable from the system board.
The sticker and the cable connector(below the sticker)
Peel the tape and disconnect the battery cable from the system board.
Step 6
Drain the power
- Press and hold the power button for five seconds to ground the computer and drain the flea power.
Press and hold the power button for five seconds to ground the computer and drain the flea power.
Step 7
Lift the mylar
- Where I am talking about.
- Lift the mylar to uncover the memory module.
- Use your fingertips to carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops up.
Where I am talking about.
Lift the mylar to uncover the memory module.
Use your fingertips to carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops up.
Step 8
Removing
- Remove the memory module from the memory-module slot.
Remove the memory module from the memory-module slot.
Step 9
Storing the removed RAM
- Store the Ram sticks safely in an anti-static bag.
Store the Ram sticks safely in an anti-static bag.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kind-hearted, spirited Man
Member since: 08/15/2021
1,052 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Android Alliance
Member of Android Alliance
Community
82 Members
644 Guides authored