Difficulty

Moderate

Steps

10

Time Required

                          3 - 7 minutes

Sections

1

  • Display Assembly
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 15 3568

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Open the Display
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Turn the computer over and open the display as far as possible.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Turn the computer over and open the display as far as possible.

1024

Step 2

              Note the Antenna Cable
  • Note the antenna cable routing and remove the antenna cables from its routing guides on the computer base.

Note the antenna cable routing and remove the antenna cables from its routing guides on the computer base.

Step 3

              Remove the Cable
  • Note the display cable routing and remove the cable from its routing guides on the computer base.

Note the display cable routing and remove the cable from its routing guides on the computer base.

Step 4

              Remove the Screws
  • Remove the screws that secure the display hinges to the computer base.

Remove the screws that secure the display hinges to the computer base.

Step 5

              Lifting the Display Assembly
  • Carefully lift the display assembly off the computer base.

Carefully lift the display assembly off the computer base.

Step 6

              Align the Screw Holes
  • Align the screw holes on the display hinges with the screw holes on the computer base.

Align the screw holes on the display hinges with the screw holes on the computer base.

Step 7

              Replace the Screws
  • Replace the screws that secure the display hinges to the computer base.

Replace the screws that secure the display hinges to the computer base.

Step 8

              Route the Display Cable
  • Route the display cable through its routing guides on the computer base.

Route the display cable through its routing guides on the computer base.

Step 9

              Routing the Antenna Cables
  • Route the antenna cables through its routing guides and slide the antenna cables through the slot on the computer base.

Route the antenna cables through its routing guides and slide the antenna cables through the slot on the computer base.

Step 10

              Close the Display
  • Close the display and turn the computer over.

Close the display and turn the computer over.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored