Difficulty
Easy
Steps
12
Time Required
5 - 15 minutes
Sections
1
- Hard Drive
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 15 3565
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disconnect the Hard Drive Cable
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
- Open the latch and disconnect the hard-drive cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Open the latch and disconnect the hard-drive cable from the system board.
1024
Step 2
Remove the Screws
- Remove the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
Remove the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
Step 3
Lifting the Hard-Drive Assembly
- Lift the hard-drive assembly off the palm-rest assembly.
Lift the hard-drive assembly off the palm-rest assembly.
Step 4
Disconnecting the Interposer
- Disconnect the interposer from the hard-drive assembly.
Disconnect the interposer from the hard-drive assembly.
Step 5
Remove the Screws
- Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Step 6
Lifting the Hard Drive
- Lift the hard drive off the hard-drive bracket.
Lift the hard drive off the hard-drive bracket.
Step 7
Align the Screw Holes
- Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.
Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.
Step 8
Replace the Screws
- Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Step 9
Connect the Interposer
- Connect the interposer to the hard drive.
Connect the interposer to the hard drive.
Step 10
Placing the Hard Drive Assembly
- Place the hard-drive assembly in the palm-rest assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly.
Place the hard-drive assembly in the palm-rest assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly.
Step 11
Replace the Screws
- Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
Step 12
Sliding the Hard Drive Cable
- Slide the hard-drive cable into its connector on the system board and close the latch to secure the cable.
Slide the hard-drive cable into its connector on the system board and close the latch to secure the cable.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
