Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- LCD Screen
- 4 steps
Flags
0
BackDell Inspiron 15 5000 Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The screen on a laptop serves as an output device for the operating system. One of the ways that a screen is damaged is when you see multiple color lines on the screen. The most common cause of screen damage occurs from dropping the laptop. Applying too much pressure on the screen will also cause the screen to break. Therefore, always make sure your laptop screen is handled with care.
What you need
Step 1
LCD Screen
- Power off the laptop.
- Flip the laptop over so the bottom is facing up.
- Slide the right button to the unlock symbol.
- Slide the left button to the other unlock symbol.
- While holding the left button, use your right finger to raise the battery up from the laptop.
Power off the laptop.
Flip the laptop over so the bottom is facing up.
Slide the right button to the unlock symbol.
Slide the left button to the other unlock symbol.
While holding the left button, use your right finger to raise the battery up from the laptop.
1024
Step 2
- Flip the laptop over so the top is facing up and open the laptop.
- Using both hands, unsnap the tabs around the perimeter of the bezel and remove it from the laptop.
Flip the laptop over so the top is facing up and open the laptop.
Using both hands, unsnap the tabs around the perimeter of the bezel and remove it from the laptop.
Step 3
- Remove the four screws from the corners of the LCD using a Phillips screwdriver.
- Lift the screen up and place it on the keyboard.
Remove the four screws from the corners of the LCD using a Phillips screwdriver.
Lift the screen up and place it on the keyboard.
Step 4
- Gently peel off the yellow clear tape securing the video connector.
- Use an opening tool to flip open the video connector bracket.
- Make sure not to force the video cable when removing it from the connector bracket.
- Disconnect the cable from the LCD screen and remove the LCD from the laptop.
Gently peel off the yellow clear tape securing the video connector.
Use an opening tool to flip open the video connector bracket.
Make sure not to force the video cable when removing it from the connector bracket.
Disconnect the cable from the LCD screen and remove the LCD from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Najeemdeen Lamidi
Member since: 09/19/2020
130 Reputation
1 Guide authored
Badges:
3
Team
York University, Team S3-G48, Melo-Thaiss Fall 2020
Member of York University, Team S3-G48, Melo-Thaiss Fall 2020
YORK-MELO-THAISS-F20S3G48
1 Member
1 Guide authored