Dell Inspiron 15 3521 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 - 30 minutes

Sections

RAM
3 steps
Motherboard
10 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

BackDell Inspiron 15-3521
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Remove the battery

We are removing the battery to avoid the possibility of an electrical discharge when working with this system.
Flip the laptop over.
Slide the latches toward the outside of the laptop to unlock the battery.
Lift the battery out of the laptop.

We are removing the battery to avoid the possibility of an electrical discharge when working with this system.

Flip the laptop over.

Slide the latches toward the outside of the laptop to unlock the battery.

Lift the battery out of the laptop.

1024

Step 2

              Remove access door

Loosen the two screws attaching the access door to the laptop body
Using a spudger, pry open the access door from the laptop
Using your fingers, open and remove the access door from the laptop, exposing the memory cards underneath.

Loosen the two screws attaching the access door to the laptop body

Using a spudger, pry open the access door from the laptop

Using your fingers, open and remove the access door from the laptop, exposing the memory cards underneath.

Step 3

              Memory Card Removal/Replacement

To access the memory cards, push out the latches on the left and right of the memory cards
To remove the memory card, pull it out of the tray with the latches still stretched out
Insert a new memory card in to the memory card tray, depressing until side latches engage with a click.

To access the memory cards, push out the latches on the left and right of the memory cards

To remove the memory card, pull it out of the tray with the latches still stretched out

Insert a new memory card in to the memory card tray, depressing until side latches engage with a click.

Step 4

              Removing Underside Screws

Before flipping the laptop right-side up, remove screws holding the back plate to the laptop frame
Remove the backplate screws using a phillips head PH0 screwdriver (11).
Remove the screws located underneath the battery and access panel using the same phillips head PH0 screwdriver (3).

Before flipping the laptop right-side up, remove screws holding the back plate to the laptop frame

Remove the backplate screws using a phillips head PH0 screwdriver (11).

Remove the screws located underneath the battery and access panel using the same phillips head PH0 screwdriver (3).

Step 5

              Removing the Keyboard

Flip the laptop right-side-up
Using a spudger, separate the keyboard from the laptop frame.
Using fingers to remove the keyboard from the laptop frame, be careful not to damage the keyboard cable.

Flip the laptop right-side-up

Using a spudger, separate the keyboard from the laptop frame.

Using fingers to remove the keyboard from the laptop frame, be careful not to damage the keyboard cable.

Step 6

              Disconnecting the Keyboard Cable

To disconnect the keyboard, locate the keyboard cable locking mechanism.
Open the locking mechanism by gently pulling up.
Slide out the keyboard cable from the interface to separate the keyboard from the laptop.

To disconnect the keyboard, locate the keyboard cable locking mechanism.

Open the locking mechanism by gently pulling up.

Slide out the keyboard cable from the interface to separate the keyboard from the laptop.

Step 7

              Underneath the Keyboard

Locate the wireless card location underneath the removed keyboard.
Disengage the antenna cables connecting the laptop to the wireless card.
Using a phillips head PH0 screwdriver, unscrew the single screw holding the wireless card to the laptop frame.
Remove the wireless card.

Locate the wireless card location underneath the removed keyboard.

Disengage the antenna cables connecting the laptop to the wireless card.

Using a phillips head PH0 screwdriver, unscrew the single screw holding the wireless card to the laptop frame.

Remove the wireless card.

Step 8

              Disconnect the Palmrest Cables

Unplug the palmrest cables, which are denoted by a blue and a purple marking.
To remove, lift up the locking tab and pull the cables from their laptop interface.

Unplug the palmrest cables, which are denoted by a blue and a purple marking.

To remove, lift up the locking tab and pull the cables from their laptop interface.

Step 9

              Removing Palmrest Screws

Remove the four 2.5 mm by 5 mm screws underneath the keyboard plate using a phillips head PH0 screwdriver.
Remove the three 2 mm by 3 mm screws underneath the keyboard plate using a phillips head PH0 screwdriver.

Remove the four 2.5 mm by 5 mm screws underneath the keyboard plate using a phillips head PH0 screwdriver.

Remove the three 2 mm by 3 mm screws underneath the keyboard plate using a phillips head PH0 screwdriver.

Step 10

              Disconnecting the Palmrest

Using a spudger, separate the palmrest from the base of the laptop. This interface is located around the equator of the laptop.
Use your fingers to completely remove the palmrest from the laptop base.

Using a spudger, separate the palmrest from the base of the laptop. This interface is located around the equator of the laptop.

Use your fingers to completely remove the palmrest from the laptop base.

Step 11

              Cables to Separate from the Motherboard 1

First, remove the power cable, located in the upper left hand side of the laptop. This can be removed using forceps or using your fingers.
Second, remove the LCD cable located in the upper center of the laptop. This cablemust be removed using the same unlocking procedure as the palmrest cables used in step 6.
The first image shown has the wireless card still connected, however, for removal of the power cable, removing the wireless card is necessary in revealing the power cable. See second image.

First, remove the power cable, located in the upper left hand side of the laptop. This can be removed using forceps or using your fingers.

Second, remove the LCD cable located in the upper center of the laptop. This cablemust be removed using the same unlocking procedure as the palmrest cables used in step 6.

The first image shown has the wireless card still connected, however, for removal of the power cable, removing the wireless card is necessary in revealing the power cable. See second image.

Step 12

              Cables to Separate from the Motherboard 2

Third, unplug the speaker cables using forceps or by using your fingers.
Fourth, unplug the final cable, denoted by a purple plastic flag. This cable uses the same locking mechanism as the palmrest cables seen in step 6.
The final cable is shown detached in the first image.

Third, unplug the speaker cables using forceps or by using your fingers.

Fourth, unplug the final cable, denoted by a purple plastic flag. This cable uses the same locking mechanism as the palmrest cables seen in step 6.

The final cable is shown detached in the first image.

Step 13

              Remove the motherboard

Unscrew the motherboard from the laptop frame using a phillips head PH0 screwdriver.
Then, use your fingers to remove the motherboard from the laptop.

Unscrew the motherboard from the laptop frame using a phillips head PH0 screwdriver.

Then, use your fingers to remove the motherboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      22 other people completed this guide.

Author

                                      with 6 other contributors

                    Stephen Landeene

Member since: 10/13/2014

416 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Clemson, Team 3-1, Benson Fall 2014                        

                                                  Member of Clemson, Team 3-1, Benson Fall 2014 



                    CLEM-BENSON-F14S3G1                     


                                            4 Members                     


                                            9 Guides authored

masumahamad877 - Jan 27, 2017

masumahamad877@gmail.com

01711377875 ,02 9613003

Bullets!#

Slice and Dice#

Better Introduction#

What you need#

Team#

Bullets!

Slice and Dice

Better Introduction

What you need

Team