Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackDell Inspiron 14z-5423
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Close the display and turn over the computer.
- Make sure your device is powered down and unplugged before beginning the replacement.
Close the display and turn over the computer.
Make sure your device is powered down and unplugged before beginning the replacement.
1024
Step 2
- Use a J0 bit tipped screwdriver to unscrew the one 6 mm Phillips screw on the RAM cover.
Use a J0 bit tipped screwdriver to unscrew the one 6 mm Phillips screw on the RAM cover.
Step 3
- Lightly lift the RAM cover up and at an angle, away from the computer.
Lightly lift the RAM cover up and at an angle, away from the computer.
Step 4
- Use your fingers to carefully pull the securing clips on the RAM away from each other.
- The RAM should pop up when the clips are released.
Use your fingers to carefully pull the securing clips on the RAM away from each other.
The RAM should pop up when the clips are released.
Step 5
- Remove the popped up RAM by pulling it away from the connection.
- If it does not pop up pry it out in a steady and straight direction.
Remove the popped up RAM by pulling it away from the connection.
If it does not pop up pry it out in a steady and straight direction.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Brittany
Member since: 09/12/2016
863 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
CSU Fullerton, Team 2-2, Bruce Fall 2016
Member of CSU Fullerton, Team 2-2, Bruce Fall 2016
CSUF-BRUCE-F16S2G2
5 Members
11 Guides authored
