Dell Inspiron 14Z 5423 Memory Modules Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          3 - 10 minutes            

Sections

1

• Memory Modules
• 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 14z-5423

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Close the Display               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in “Before You Begin”. After working inside your computer, follow the instructions in “After Working Inside Your Computer”.
• Close the display and turn the computer over.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in “Before You Begin”. After working inside your computer, follow the instructions in “After Working Inside Your Computer”.

Close the display and turn the computer over.

1024

Step 2

              Loosen the Screw               

• Loosen the captive screw that secures the memory-module cover to the computer base.

Loosen the captive screw that secures the memory-module cover to the computer base.

Step 3

              Lifting the Cover               

• Using your fingertips, lift and slide the memory-module cover out of the slots on the computer base.

Using your fingertips, lift and slide the memory-module cover out of the slots on the computer base.

Step 4

              Remove the Memory Module               

• Remove the memory module from the memory-module connector.

Remove the memory module from the memory-module connector.

Step 5

              Align the Notch               

• Align the notch on the NEW memory module with the tab on the memory-module connector.

Align the notch on the NEW memory module with the tab on the memory-module connector.

Step 6

              Sliding the Memory Module               

• Slide the memory module firmly into the connector at a 45-degree angle and press the memory module down until it clicks into place.If you do not hear the click, remove the memory module and reinstall it.

Slide the memory module firmly into the connector at a 45-degree angle and press the memory module down until it clicks into place.If you do not hear the click, remove the memory module and reinstall it.

Step 7

              Slide the Tabs               

• Slide the tabs on the memory-module cover into the slots on the computer base and snap the memory-module cover into place.

Slide the tabs on the memory-module cover into the slots on the computer base and snap the memory-module cover into place.

Step 8

              Tighten the Screw               

• Tighten the captive screw that secures the memory-module cover to the computer base.

Tighten the captive screw that secures the memory-module cover to the computer base.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored