Difficulty

Moderate

Steps

10

Time Required

                          4 - 25 minutes

Sections

1

  • Display Assembly
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 14z 1470

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
  • Remove the two screws on the base of the computer that secure the display assembly to the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.

Remove the two screws on the base of the computer that secure the display assembly to the computer base.

1024

Step 2

              Disconnecting the Display Cable
  • Disconnect the display cable and remove the screw from the system board.

Disconnect the display cable and remove the screw from the system board.

Step 3

              Pull the Antenna Cables
  • Pull the Mini-Card antenna cables up through the slot in the computer base.

Pull the Mini-Card antenna cables up through the slot in the computer base.

Step 4

              Note the Routing
  • Note the routing of all the cables and remove them from their routing guides.

Note the routing of all the cables and remove them from their routing guides.

Step 5

              Removing the Display
  • Hold the display while you remove the three screws that secure the display assembly to the computer base.

Hold the display while you remove the three screws that secure the display assembly to the computer base.

Step 6

              Removing the Display Assembly
  • Lift and remove the display assembly from the computer base.

Lift and remove the display assembly from the computer base.

Step 7

              Place the Display Assembly
  • Using the alignment posts, place the NEW display assembly in position and replace the three screws that secure the display assembly to the computer base.

Using the alignment posts, place the NEW display assembly in position and replace the three screws that secure the display assembly to the computer base.

Step 8

              Routing the Antenna Cables
  • Route the Mini-Card antenna cables and display cable through their routing guides.

Route the Mini-Card antenna cables and display cable through their routing guides.

Step 9

              Route the Antenna Cables
  • Route the antenna cables through the slot in the computer base.

Route the antenna cables through the slot in the computer base.

Step 10

              Replace the Screw
  • Replace the screw and connect the display cable.

Replace the screw and connect the display cable.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored