Difficulty
Easy
Steps
9
Time Required
7 - 15 minutes
Sections
1
- Display Assembly
- 9 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackDell Inspiron 1440
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Screws
- WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
- CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
- Remove the two screws from the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
Remove the two screws from the computer base.
1024
Step 2
Disconnecting the Camera Cable
- Disconnect the camera cable from the system board connector.
Disconnect the camera cable from the system board connector.
Step 3
Removing the Cables
- Make note of the Mini-Card antenna cables, camera cable, and the display cable routing and remove the cables from their routing guides.
Make note of the Mini-Card antenna cables, camera cable, and the display cable routing and remove the cables from their routing guides.
Step 4
Remove the Screws
- Remove the two screws that secure the display assembly to the computer base.
Remove the two screws that secure the display assembly to the computer base.
Step 5
Removing the Display Assembly
- Lift and remove the display assembly from the computer base.
Lift and remove the display assembly from the computer base.
Step 6
Placing the Display Assembly
- Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.
Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.
Step 7
Routing the Cables
- Route the Mini-Card antenna cables, camera cable, and display cable through the routing guides.
Route the Mini-Card antenna cables, camera cable, and display cable through the routing guides.
Step 8
Connecting the Camera Cable
- Connect the camera cable to the system board connector.
Connect the camera cable to the system board connector.
Step 9
Replace the Screws
- Replace the two screws at the bottom of the computer.
Replace the two screws at the bottom of the computer.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
djshebanana - Sep 10, 2020
Reply
Se puede upgradear la pantalla de esta laptop por una mejor ya sea un panel FHD IPS o no? Existe alguna compatibilidad para poder hacer un upgrade de pantalla? muchas gracias