Dell Inspiron 1425 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          8 - 30 minutes            

Sections

1

• Display Assembly
• 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 1425

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in “Before You Begin”.
• CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
• Remove the two screws from the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in “Before You Begin”.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Remove the two screws from the computer base.

1024

Step 2

              Loosen the Cable               

• Loosen the display cable grounding screw.

Loosen the display cable grounding screw.

Step 3

              Disconnecting the Display Cable               

• Disconnect the display cable from the connector on the system board.

Disconnect the display cable from the connector on the system board.

Step 4

              Remove the Screws               

• Remove the four screws that secure the display assembly to the computer base.

Remove the four screws that secure the display assembly to the computer base.

Step 5

              Removing the Display Assembly               

• Lift the display assembly off the computer base.

Lift the display assembly off the computer base.

Step 6

              Placing the Display Assembly               

• Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

Step 7

              Routing the Cables               

• Route the display cable and Mini-Card antenna cables through the routing guides.

Route the display cable and Mini-Card antenna cables through the routing guides.

Step 8

              Connecting the Display Cable               

• Connect the display cable to the connector on the system board.

Connect the display cable to the connector on the system board.

Step 9

              Tighten the Cable Screw               

• Tighten the display cable grounding screw.

Tighten the display cable grounding screw.

Step 10

              Replace the Screws               

• Replace the two screws at the bottom of the computer.

Replace the two screws at the bottom of the computer.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored