Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
2
- Battery
- 1 step
- RAM
- 2 steps
Flags
0
BackDell Inspiron 1420
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the two tabs to release the battery.
- Pull the battery out.
Slide the two tabs to release the battery.
Pull the battery out.
1024
Step 2
Removing the panel
- Using a Phillips #00 screwdriver, remove the three 2.5mm screws from the panel.
- Pull back the panel and set it aside.
Using a Phillips #00 screwdriver, remove the three 2.5mm screws from the panel.
Pull back the panel and set it aside.
Step 3
Removing the RAM
- Spread apart the securing clips on both ends of the chip until the module pops out.
- Remove the RAM from the connector.
- These represent the clips of a second module
Spread apart the securing clips on both ends of the chip until the module pops out.
Remove the RAM from the connector.
These represent the clips of a second module
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Shaun Dinsmore
Member since: 09/23/2014
81 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 2-4, Blackwell Fall 2014
Member of USF Tampa, Team 2-4, Blackwell Fall 2014
USFT-BLACKWELL-F14S2G4
4 Members
5 Guides authored
