Dell Inspiron 1410 Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 - 20 minutes

Sections

Hard Drive
6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackDell Inspiron 1410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
Remove the two screws securing the hard drive assembly to the system board.

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

Remove the two screws securing the hard drive assembly to the system board.

1024

Step 2

              Removing the Hard Drive Assembly

Holding the connector end of the hard drive assembly, pull the hard drive assembly from the system board connector.

Holding the connector end of the hard drive assembly, pull the hard drive assembly from the system board connector.

Step 3

              Removing the Hard Drive Cage

Press down on the hard drive at the non-connector end slot to remove the hard drive off the hard drive cage.

Press down on the hard drive at the non-connector end slot to remove the hard drive off the hard drive cage.

Step 4

              Placing the Hard Drive

Place the NEW hard drive in the hard drive cage and press it down until it snaps into place.

Place the NEW hard drive in the hard drive cage and press it down until it snaps into place.

Step 5

              Aligning the Hard Drive

Push down the hard drive assembly in place by aligning the hard drive connector with the system board connector.

Push down the hard drive assembly in place by aligning the hard drive connector with the system board connector.

Step 6

              Replace the Screws

Replace the two screws securing the hard drive assembly to the system board.

Replace the two screws securing the hard drive assembly to the system board.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

Team#

Member-Contributed Guide

Introduction

What you need

Team